Our engineers and scientists from R&D and application technology develop tribological solutions according to your requirements.
Our engineers and scientists from R&D and application technology develop tribological solutions according to your requirements.
Test field: Our know-how
We have extensive testing facilities at our headquarters in Wolfratshausen. Our products are tested for their performance in practical tests. We are able to carry out preliminary tests quickly and incorporate the findings directly into the development process. For our customers this means
- High flexibility and short development times
- Test methods specially tailored to the development requirements
- Practical preliminary testing of our product development and continuous
- assurance of the performance of our products
Our testing facilities at a glance
Chemical-physical and analytical testing equipment
Our chemical-physical and analytical testing facilities include methods such as thermogravimetric analysis, gas chromatography, high-performance liquid chromatography and spray pattern analysis.
They enable a detailed examination of properties such as viscosity, density, flow behavior and chemical composition. These methods ensure that our products meet the highest quality standards and satisfy our customers' requirements.
- Thermogravimetric analysis
- Gas chromatography
- High-performance liquid chromatography
- Spray pattern analysis and analysis of particle distribution
- Determination of the infrared spectrum according to DIN 51451
- Determination of kinematic viscosity according to DIN 53019-1
- Determination of dynamic viscosity according to DIN EN ISO 3104
- Determination of the viscosity-temperature behavior according to DIN 51563
- Determination of density according to DIN 51757
- Determination of flash point according to DIN EN ISO 2592 and DIN 51755
- Determination of cone penetration according to DIN ISO 2137
- Determination of the dropping point according to DIN ISO 2176
- Determination of oil separation according to DIN 51817
- Determination of apparent dynamic viscosity according to DIN 51810-1
- Determination of the yield point according to DIN 51810-2
- Determination of the acid number according to ASTM D 664
- Determination of the base number according to ISO 3771
- Determination of the saponification number according to DIN 51559-1
- Determination of ash according to DIN EN ISO 6245
- Determination of sulphated ash according to DIN 51575
- Determination of the corrosion effect on copper according to DIN 51811
- Condensation water alternating climate according to DIN EN ISO 6270-2
- Salt spray test DIN EN ISO 9227
- Determination of the pH value in accordance with DIN 19268
- Determination of the refractive index according to DIN 51423
- Determination of surface roughness
- Determination of electrical conductivity according to DIN EN 27888
- Determination of the specific electrical resistance of consistent lubricants
- KEYENCE microscopy
- Cross-cut test according to DIN EN ISO 2409
- Determination of grinding fineness according to DIN EN ISO 1524
Mechanical-dynamic testing equipment
Our mechanical-dynamic testing equipment includes advanced testing machines such as the FE9 rolling bearing testing machine (DIN 51819), EMCOR testing machine (DIN 51802), SRV tester (DIN 51834), rolling stability tester (ASTM D 1831), four-ball tester (DIN 51350), lubricant tester according to Brugger (DIN 51347) and the press-fit test.
We use this equipment to carry out precise tests on lubricants and materials to ensure that they meet the highest quality standards.
- FE9 rolling bearing testing machine to DIN 51819
- EMCOR testing machine to DIN 51802
- SRV tester to DIN 51834
- Rolling stability tester to ASTM D 1831
- Four-ball tester to DIN 51350
- Brugger lubricant tester to DIN 51347
- Press-fit test
Would you prefer to be contacted by us?
Then please leave us your e-mail address and we will get back to you shortly: